Lifetime Limited Warranty

All HONE-O-DRIVE™ overdrive units sold here are covered by the manufacture’s 1,000 hp/1,000 ft-lb torque for vehicles up to 8,500 lbs GVW (Gross Vehicle Weight) Lifetime Limited Warranty, all MANUAL SHIFTERS sold here are covered by the manufacturer’s Lifetime Limited Warranty when purchased for use on a new HONE-O-DRIVE™ overdrive unit, otherwise all MANUAL SHIFTERS sold here are covered by the manufacturer’s ninety (90) day Warranty, and all ELECTRONIC ACTUATORS sold here are covered by the manufacturer’s ninety (90) day Warranty as follows hereinbelow;

Hone-O-Drive™ Lifetime Limited Warranty

HONE-O-DRIVE™ Overdrive Units.
Subject to the following section (“Limitation”), Hone Manufacturing Co., warrants to the original purchaser (“Customer”) of the HONE-O-DRIVE™ overdrive unit for use only on the original vehicle, and not to subsequent purchasers or subsequent vehicles, of the Hone Manufacturing Co., product (“Product”) for a period of time commencing on the date of shipment of the Product from Hone Manufacturing Co., and ending on the Product end of support date in accordance with the following section (“End of Life Policy”).

MANUAL SHIFTERS.
Subject to the following section (“Limitation”), Hone Manufacturing Co., warrants to the original purchaser (“Customer”) of the MANUAL SHIFTER unit only when purchased for use with a new HONE-O-DRIVE™ overdrive unit for use only on the original vehicle, and not to subsequent purchasers or subsequent vehicles, of the Hone Manufacturing Co., product (“Product”) for a period of time commencing on the date of shipment of the Product from Hone Manufacturing Co., and ending on the Product end of support date in accordance with the following section (“End of Life Policy”). Alternatively, subject to the following section (“Limitation”), Hone Manufacturing Co., warrants to the original purchaser (“Customer”) of the MANUAL SHIFTER unit when NOT purchased for use with a new HONE-O-DRIVE™ overdrive unit, and not to subsequent purchasers, of the Hone Manufacturing Co., product (“Product”) for a period of ninety (90) days commencing on the date of shipment of the Product from Hone Manufacturing Co.

ELECTRONIC ACTUATORS.
Subject to the following section (“Limitation”), Hone Manufacturing Co., warrants to the original purchaser (“Customer”) of the ELECTRONIC ACTUATOR unit, and not to subsequent purchasers, of the Hone Manufacturing Co., product (“Product”) for a period of ninety (90) days commencing on the date of shipment of the Product from Hone Manufacturing Co.

Validation.
The date of shipment of a Product by Hone Manufacturing Co., is set forth on the packaging material in which the Product is shipped. For the warranty to be valid, Customer, within 30 days of the date of shipment, must completely fillout and return the Warranty Registration Card, included with the packaging material, to Hone Manufacturing Co., at the address shown on the Warranty Registration Card. For the warranty to be valid, any Product returned to Hone Manufacturing Co., under this warranty must be done in compliance with a valid RMA number and instructions as authorized by Hone Manufacturing Co., at time of RMA issuance and must be shipped to Hone Manufacturing Co., in the original Product packaging.

Remedy.
In the event of a failure of any Product to comply with the foregoing warranty during the applicable warranty period Hone Manufacturing Co., shall, at its option and sole discretion, repair or replace the Product (which may include a workaround) or refund the fees paid by Customer for such Product (following Customer’s return of such Product in its original packaging, freight and insurance prepaid by Customer, to appropriate source in accordance with the RMA instructions issued to the Customer at the time of RMA authorization by Hone Manufacturing Co.). The foregoing sets forth Customer’s sole and exclusive remedies for breach of the above warranties. Replacement Products will be warranted for the remaining warranty period of the original Products, and may be new or refurbished Products.

Limitation.
The warranties set forth above shall not apply to (i) any third party components or hardware, whether or not such third party components or hardware is provided by Hone Manufacturing Co.; (ii) any Products which have been modified or repaired, except by Hone Manufacturing Co.; or (iii) any Products which have not been maintained in accordance with any handling or operating instructions supplied by Hone Manufacturing Co., or that have been subjected to unusual physical or electrical stress, misuse, negligence or accidents.

Disclaimer of Warranties.
EXCEPT FOR THE EXPRESS WARRANTIES AND CONDITIONS SET FORTH ABOVE, HONE MANUFACTURING CO., MAKES NO OTHER WARRANTIES OR CONDITIONS RELATING TO THE PRODUCTS PROVIDED, EXPRESS, IMPLIED OR STATUTORY, AND EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT WILL HONE MANUFACTURING CO., BE LIABLE TO CUSTOMER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES OF ANY KIND (INCLUDING BUT NOT LIMITED TO ANY LOST PROFITS OR LOST SAVINGS, LOSS OF USE OR INTERRUPTION OF BUSINESS, OR PROCUREMENT OF SUBSTITUTE GOODS), HOWEVER CAUSED, WHETHER ARISING IN CONTRACT, TORT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF HONE MANUFACTURING CO., WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND WHETHER OR NOT ANY REMEDY PROVIDED SHOULD FAIL OF ITS ESSENTIAL PURPOSE. HONE MANUFACTURING CO., TOTAL LIABILITY UNDER THIS WARRANTY TO CUSTOMER IN RELATION TO THE PRODUCT SHALL BE LIMITED TO THE AMOUNTS PAID TO HONE MANUFACTURING CO., FOR SUCH PRODUCT.

End of Life Policy.
Definitions;
End-of-Life – The “End-of-Life” (EOL) process is a series of technical and business milestones and activities that, once completed, make a product or service obsolete. Once obsolete, the product or service is no longer sold, manufactured, improved, repaired, maintained, or supported. EOL includes both the end-of-sale date and End-of-Support date.
End-of-Sale Date – The “End-of-Sale” date is the last date a customer may order the EOL product or service through Hone Manufacturing Co., point-of-sale mechanisms. The EOL product or service is no longer for sale after that date.
End-of-Support Date – The “End-of-Support” date is the last date an EOL product or service will be supported by Hone Manufacturing Co.

Summary;
EOL encompasses both the End-of-Sale date and End-of-Support processes and business rules associated with any product or service EOL strategy. At the conclusion of the EOL phase, Hone Manufacturing Co., will no longer process Return Material Authorizations (RMAs).

The End-of-Support date is five (5) years after the original End-of-Sale date for a Hone Manufacturing Co., product. If the End-of-Sale date is extended, the End-of-Support date will not be extended; it will remain the same.